Ask for the wrong trailer and one of two things happens. The machine is too tall and the load needs a permit it did not have to need, or the truck arrives and there is no way to get the machine onto the deck. Two questions settle it: how tall is the piece, and how does it get on and off?
Step deck
A flatbed with a lower main deck behind a short upper deck. The lower deck sits closer to the road, so it carries freight up to about 10 feet tall without an over height permit, where a standard flatbed tops out at about 8 feet 6 inches. Many carry ramps, so smaller equipment can drive on from the back. It is the everyday choice for taller machinery, fabricated metal, and large tanks. See step deck trucking.
Double drop
The deck drops twice, leaving a low section, called the well, between the front deck and the rear axles. The well carries freight up to about 11 feet 6 inches to 12 feet tall. The neck is fixed, so the piece is set in the well from the side or from above with a crane or a forklift. It suits tall freight that does not roll. The well is short, usually about 25 to 29 feet, so the piece has to fit that length as well as that height.
RGN (removable gooseneck)
An RGN is the lowboy most people picture. The gooseneck at the front detaches and the front of the deck lowers to the ground to make a ramp, so a machine on wheels or tracks drives on at ground level. It has the same low well as a double drop. For heavier machines, axles are added to spread the weight. It is the trailer for excavators, dozers, loaders, and other drivable equipment. See RGN, lowboy and double drop.
How to pick
- Up to about 10 feet tall, lifted on or light enough to drive up ramps: step deck.
- Taller than that and it does not roll: double drop, loaded by crane or forklift.
- It drives or tracks on, or it is heavy: RGN.
- Longer than the deck: a stretch (extendable) trailer.
Width and weight matter too. A piece wider than 8 feet 6 inches needs a permit on any trailer. So does freight much over about 45,000 to 48,000 pounds, which usually puts the truck over the legal weight. For how that works, read what to know before you ship an oversize or overweight load.
What to send for a quote
The make and model, the length, width, height, and weight, whether it runs and drives, and what will load and unload it at each end.
Or send it to Fello
You do not have to pick the trailer yourself. We arrange heavy haul and oversize loads on step decks, double drops, RGNs, lowboys, multi-axle trailers, and more, with one contact start to finish. Send over the dimensions, weight, origin, and destination, and we’ll get you pricing and availability quickly.